Caring For Your Chainsaw
Written by admin on January 16, 2010 – 6:13 am -There are many uses for a chainsaw around your home. This tool can be used to cut up lengths of wood for heating purposes, clearing brush and trees for new land, and even cutting large pieces of lumber for construction. When cared for correctly, your chainsaw can last for many years, providing top performance for all the jobs you can find for it. Follow these caring tips to keep your chain saw running at maximum efficiently.
Mix Gas Correctly
Keeping the right kind of gas in your chain saw is one of the most important ways to take care of the machine. When you refuel, use regular gas with a mixture of 1-40 oil. Never use unleaded gas, which is for larger engines. Mix your gas and oil to the right combination in a clean container. Any impurities in the gas will cause the engine to malfunction.
Check the Spark Plug
Each time you add more gas to the chainsaw, also check the sparkplug to make sure that there is not any oil or gas coating the plug. If there is, replace the spark plug with a clean one. You can set the other spark plug aside and use again later.
Clean Air Filter Periodically
If you use your chain saw a lot throughout the year, clean your air filter at least once every couple of weeks. This will keep it clean and free of any wood chips, dirt or debris. The air cleaner is housed under the carburetor and is easily removed with a few screws. Take it out and set it in water with a mild detergent. Let it soak until the grime can be easily removed. Rinse it thoroughly and let dry completely before putting it back on.
Always Check Bar Oil
Whenever you add more gas, you should always add more bar oil, also called chain oil. Keep the reservoir filled up to make sure the chain moves freely and doesn't stick when in the middle of a piece of wood.
Keep Chain Sharpened
The wood, dirt and heat generated from cutting wood quickly causes the chain to become dull. Keeping your chain sharp makes cutting a lot easier and safer. Hold a round file at a 35 degree angle, and file from the inside out. Use about 4 file strokes per tooth with a smooth, strong stroke. Repeat this procedure with each tooth on the chain.
Keep your chain saw working for years to come by keeping it in top condition. These tips will help you do that.
Tags: echo chainsaw, gas chainsaw, husqvarna chainsaw, Stihl
Posted in Chainsaws, Echo, Gas Chainsaws, Stihl | No Comments »
